Description
Self-Healing Foam
The RINEHART foam is firmer and denser than the foams of other manufacturers and has a stopping effect that does not allow wood, aluminium or even carbon arrows to penetrate as far into the target. Due to the lower penetration depth, the arrows can of course be removed much easier afterwards.
As soon as the arrow is drawn, the self-healing process of the foam begins, which takes only 10 seconds to almost completely seal the hole again.
(To benefit from this process as long as possible, the arrows should be removed as quickly as you can!)
Absolutely weatherproof
RINEHART's 3D targets are absolutely weatherproof, even in the long run. The through-dyed foam resists direct sunlight (UV light), extreme temperatures and the most diverse weather conditions without losing its stopping effect or self-healing capabilities.
Replaceable Inserts
In case the long-lasting foam is ever worn out, some 3D targets have replaceable inserts. These are fixed in the target with the patented attachment system and are therefore extremely tight.
Simulated animal weights / Measurements
In order to give the shooter a small clue as to the size of the simulated target or the approximate weight of a live animal of the same size, RINEHART always gives a simulated weight with its targets. The different sizes of the animals take the following measurements into account: length is measured from the shoulder to the tail and the height from the ground to the shoulder.
Measurements:
Height: 67cm
Length: 72cm
Simulated weight: 175 lbs (approx. 80kg)
Weight: 19kg
No inserts available.